Vickers Class F Manual

After the conclusion of World War One, the RAF was looking for a replacement for the Lewis for an observer’s gun in aircraft use. The Lewis had reliability issues, and was not a particularly fast-firing gun, and a high rate of fire was essential for effective aircraft use. In response, the Vickers company developed the Class E and F guns for RAF testing and commercial sale. Both were air-cooled, and the Class E was belt fed while the Class F used interchangeable feed block to feed from either belts or 97-round aircraft Lewis gun drums.

Vickers Class F observer gun
Class F gun with drum feed block (but no drum mounted)

These variants were both mechanically very similar to the British service Vickers gun, but with changes made mostly to reduce weight. The barrel jackets were reduced to about an inch in diameter, the trigger was changed to a single pistol grip, the fusee spring cover was removed, and the sideplates lightened. The Class F was tested by the RAF and a few guns put in military service, but it was never officially adopted by England. More than a few other countries purchased the guns, though, including Argentina, Bolivia, Brazil, Chile, China, Finland, Japan, Lithuania, the Netherlands, Peru, Siam, and Spain.

We have a copy of the Vickers commercial manual for the gun available for download:

Vickers Class F Commercial Manual (English)

4 Comments

  1. GREAT GREAT GREAT!!!
    I love Vickers machine guns and this manual is awesome !…especially the drawings!

  2. The variations on the Vickers gun could provide a lifetime of educational material. Thanks for posting yet another fascinating bit of history!

  3. i think this manual about vickers aircraft machine gun is excellent but sadly the scans of the plates are not complete, could you scan the schematics diagrams again please…
    best regards
    percy olivas

Leave a Reply to percy olivas Cancel reply

Your email address will not be published.


*