Today I’ve taken the FR-F2 to the range to try it out. I’m using the early French Army scope, an APX L806-04. This is a 3.85x optic basically modeled on the German WW2 ZF-4. It has a big simple German post reticle, and the -04 variation indicated that the BDC cam has been calibrated for 7.62mm NATO.
Submachine Guns
Hotchkiss Universal: The Most Folding Gun Made
The Hotchkiss Universal was a closed-bolt submachine gun submitted to French military trials in the late 1940s to replace the MAS-38. The French were looking for a compact SMG in 9mm Parabellum, and tested guns […]
Bolt Action Rifles
A .22LR Berthier for the French National Police (CRS)
In 1954, the Unique company (MAPF) in Hendaye France rebuilt a batch of 800 Berthier carbines into .22LR caliber for use by the Sûreté Nationale (later renamed the Police Nationale). These were to be used […]
Light MGs
Chatellerault M24/29: France’s New Wave of Post-WWI Small Arms
France fought the Great War with an array of weapons which were all sub-par in one way or another – the Lebel rifle was obsolescent by 1914, the Berthier was a cavalry carbine forced into […]
I was waiting to see this posted since last night! Great shooting and great rifle!
It could have been better.
Horizontal stitching.
As you would expect on an elderly rifle with horizontally positioned lugs and, in addition, weak bedding.
You watching how fast he’s shooting?
He’s not letting the barrel cool between shots and that heat shield is not helping.
There’s nothing wrong with the gun. If he let it cool between shots with the bolt open for about 60 seconds the group would easily be sub-MOA.
“…the group would easily be sub-MOA…”
…And if you remove the heat shield from the rifle, then the group becomes 0.5 MOA.
And if you eliminate the influence of global warming, then 0.25 MOA. LOL
PS Usually, too lazy to comment on such nonsense, but could not resist. 😉
Love to have one but for 7 grand I’ll pass , way out of my range,7000 bucks will by a few rifles, wish I could afford , ol well
Ian, that horizontal stringing may come from the bipod. Shoot it from a proper sandbag and see…
I think a lot of the blame lies with the “very precise surplus”.
A prerequisite for such systems is tight contact on both bearing surfaces of the bolt.
This obviously does not happen as the bolt closes without noticeable resistance.
Perhaps, especially for such rifles, the French produced a “sniper cartridge” with an increased main distance…
Jan!
How about shooting this rifle with reloaded brass?
This can fix the situation.
You saved the used brass, right?..
That ringing sound when fired…
It doesn’t have to be.
It may be an illusion, but the bolt handle seems to move slightly when fired.
I would question the technical serviceability of the device.
Ian? You say you are not much of a shooter?
Bullshite.
This was really good shooting, sir.
…