After about 2 years or working and waiting, my FR-F1 has arrived from France – so it’s time to get it zeroed! I am using the only commercial ammo available in the us; PPU 139gr FMJ (caliber 7.5x54mm). To properly show the accuracy this rifle is capable of, I will need to handload the ammo, and find a better shooter to use it.
Artillery
Book Review: A Gun For All Nations
I ran across a mention of this book while trying to find some information on this 37mm Hotchkiss machine gun – and this book was the only reference I could find any mention of it […]
Light MGs
8mm M1915 Chauchat Fixing and Range Testing
Well, my 8mm French Chauchat finally cleared transfer, as did my application to reactivate it. This was a “dewat”, or “Deactivated War Trophy” – a machine gun put on the NFA registry but modified to […]
Semiauto pistol
Clair Automatic Pistol
The French Clair pistol of 1893 is one of the lesser known and least documented early automatic pistols, and unusual in its method of operation as well. The majority of the successful early automatics (the […]
Ian’s integrity is apparent, he does not fudge anything. Nothing to worry about Ian, you do well and have lots of experience.
Results on target do vary. One before last shoot I felt almost proud of result, but the last one was disappointment. Same ammo, same rifle. What should I make out of it? Nothing, it happens.
For now, let’s call it “flyers” 🙂
You may get improved results, if you use the tip/pad of your trigger finger instead of placing your finger all the through the trigger guard. Just my .02 cents.
Was going to tell him myself, observed he has the habit of doing so.
Something to consider is the possible effect of the barrel warming up.
I had a Lee Enfield No 1 MK III* with a Parker Hale peep sight that changed point of impact as the barrel warmed up. After the first shot I had to move two clicks up, then after the second shot, four clicks up. Shots then stayed in the bull until the barrel cooled down. I would then move six clicks down and repeat the process. I don’t know why, that’s just the way that rifle shot.
Ian, as you said, it’s just standard FMJ ammo. with proper reloads, You’ll definitely see some improvement. Also, next time, use send sock for rear support.
I am sure it is an optical illusion, or my bad eyesight, but the front shade of the scope seems to be slanted down by the end of the video …
I always make scope adjustments one at a time. Windage usually firrst, then elevation. I don’t remember where I picked it up, probably back in the sixties reading gun magazines.
Your second group was a dandy.
Super important in case either the scope isn’t level in the rings or the shooting posture doesn’t keep the rifle itself perfectly level as both adjustments will move the POI diagonally
What is that tiny little scope atop the rifle?
Looks like APX L806 model 1953
The trigger seems to require a very long amount of travel for a “single-stage” trigger.
The scope’s ocular lens housing is banging into your cap bill when you are shooting. This makes the shooter a bit ‘punchy’ and contributes to flinching.
wrong hat?
Very, very impressive second group! That drifting zero is a feature of every European scope that I’ve ever owned and shot. The EU seems to require that scopes break by the tenth shot.
Maybe if your European scope is over fifty years old. Never had this issues with IOR Valdada, Zeiss or Schmidt & Bender scopes of recent manufacture.
Did you try getting more FAMAS mags when you were importing this?
It’s hard to come by educated people about this topic, but you sound like you
know what you’re talking about! Thanks
Accurate or not, that’s a cool looking rifle. Very unique.
I bet with some work it will do quite well.
I am sure you will figure out various tweaks with ammo and trigger pull. Great video; looking forward to one with Karl putting it through its paces. Darn good looking rifle, to boot.
Ian I was given 5 boexes of ammunition tagged 7.5 Lebel. I have no use for it. Could I send it to you?
The second group could not be an accident. It was spectacular. Looks like a loose scope mount or bedding issue?