Today I’ve taken the FR-F2 to the range to try it out. I’m using the early French Army scope, an APX L806-04. This is a 3.85x optic basically modeled on the German WW2 ZF-4. It has a big simple German post reticle, and the -04 variation indicated that the BDC cam has been calibrated for 7.62mm NATO.
Book review
Book Review: The Yanks Are Coming!
Most of the books I look at are primarily text-based, and today I figured we should do something a little bit different. Armor Plate Press, run by Tom Laemlein, specializes in photographic studies of various […]
Competition
MAS 49-56 in a 2-Gun Match
A while back, I ran a 2-Gun match on my own with my MAS 49-56 (and a plain Glock 19), including the original APX L806 optic. It was not a particularly complex match, but it […]
Bolt Action Rifles
French M14 Conversion – the Gras in 8mm Lebel (Video)
The French adopted the Gras as their first mass-issued metallic cartridge rifle in 1874, replacing the needlefire 1866 Chassepot. Quite a lot of Gras rifles were manufactured, and they became a second-line rifle when the […]
I was waiting to see this posted since last night! Great shooting and great rifle!
It could have been better.
Horizontal stitching.
As you would expect on an elderly rifle with horizontally positioned lugs and, in addition, weak bedding.
You watching how fast he’s shooting?
He’s not letting the barrel cool between shots and that heat shield is not helping.
There’s nothing wrong with the gun. If he let it cool between shots with the bolt open for about 60 seconds the group would easily be sub-MOA.
“…the group would easily be sub-MOA…”
…And if you remove the heat shield from the rifle, then the group becomes 0.5 MOA.
And if you eliminate the influence of global warming, then 0.25 MOA. LOL
PS Usually, too lazy to comment on such nonsense, but could not resist. 😉
Love to have one but for 7 grand I’ll pass , way out of my range,7000 bucks will by a few rifles, wish I could afford , ol well
Ian, that horizontal stringing may come from the bipod. Shoot it from a proper sandbag and see…
I think a lot of the blame lies with the “very precise surplus”.
A prerequisite for such systems is tight contact on both bearing surfaces of the bolt.
This obviously does not happen as the bolt closes without noticeable resistance.
Perhaps, especially for such rifles, the French produced a “sniper cartridge” with an increased main distance…
Jan!
How about shooting this rifle with reloaded brass?
This can fix the situation.
You saved the used brass, right?..
That ringing sound when fired…
It doesn’t have to be.
It may be an illusion, but the bolt handle seems to move slightly when fired.
I would question the technical serviceability of the device.
Ian? You say you are not much of a shooter?
Bullshite.
This was really good shooting, sir.
…